Siemens SINUMERIK 840D sl Function Manual page 933

Data lists
5.1 Machine data
5.1.1 Memory specific machine data
Number
HMI HMI
Advanced Embedded
9242
9243
9244
9245
9247 9247
9248 9248
9249
9400
9401
9402
9424 9424
9425
9440 9440
9449
9450 9450
Basic logic functions: Axes, coordinate systems, frames (K2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Identifier: $MM_
MA_STAT_DISPLAY_BASE
MA_TU_DISPLAY_BASE
MA_ORIAXES_EULER_ANGLE_NAME
MA_PRESET_FRAMEIDX
USER_CLASS_BASE_ZERO_OFF_PA
USER_CLASS_BASE_ZERO_OFF_MA
USER_CLASS_VERT_MODE_SK
TOOL_REF_GEO_AXIS1
TOOL_REF_GEO_AXIS2
TOOL_REF_GEO_AXIS3
MA_COORDINATE_SYSTEM
MA_SCRATCH_DEFAULT_MODE
ACTIVE_SEL_USER_DATA
WRITE_TOA_LIMIT_MASK
MM_WRITE_TOA_FINE_LIMIT
Description
Numerical basis for display of moving
joint STAT
Numerical basis for display of rotary
axis position TU
Display of orientation axes as Euler
angle
Value storage scratching and
PRESET
Availability of basic offset in
"Parameters" operating area
Availability of basic offset in Machine
operating area
Provide protection for vertical area
soft keys
Absolute dimension tool length
compensation geometry axis 1
Absolute dimension tool length
compensation geometry axis 2
Absolute dimension tool length
compensation geometry axis 3
Coordinate system for actualvalue
display
Tool offset computation for geometry
axes with scratching
Active data (frames) are immediately
operative after editing
Applicability of MD9203 to edge data
and locationdependent offsets
Limit value for wear fine
5
149