2.7.8
Part-Program Start
Start handling
Table 2-5
Typical program sequence
Sequence
Command
1
Load program (via the operator
interface or part program)
2
Select AUTOMATIC mode
3
4
NC start for preselected channel
5
6
Basic logic functions: Mode group, channel, program operation, reset response (K1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Program preselection
M02/M30/RESET
Conditions
(must be satisfied before the
command)
Channel preselected
Preselected channel in
RESET state
User ID sufficient for
program preselection
NC start disable not
available
Reference point approached in
all
axes
None
Detailed description
2.7 Program operation mode
Comments
Program execution
End of program
107