One Operator Panel Front And Three Ncus - Siemens SINUMERIK 840D sl Function Manual

2.15.3.2

One operator panel front and three NCUs

A sample configuration file is given below for a system consisting of one control unit and
three NCUs on the OPI.
Any adaptations which may need to be made are described in Section "Configurations".
; NETNAMES.INI Example 3 Start
; Identification entry:
[own]
owner = MMC_1
; Connection entry: For the planned number of up to 3 connections
[conn MMC_1]
conn_1= NCU_1
conn_2= NCU_2
conn_3= NCU_3
; Descriptive entry: The name of the network is clearly stated
[param network]
bus= opi
[param MMC_1]
name= any_name
type= MMC_100
mmc_address= 1
[param NCU_1]
name= any_name1
type= ncu_572
nck_address= 12
plc_address = 12
[param NCU_2]
name= any_name2
type= ncu_573
nck_address= 14
plc_address= 14
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Several Operator Panels on Several NCUs, Distributed Systems (B3)
2.15 Examples
215