The following output variables are written for measurement type 23:
Output variable
$AC_MEAS_RESULT[0]
$AC_MEAS_RESULT[1]
$AC_MEAS_RESULT[2]
$AC_MEAS_RESULT[3]
$AC_MEAS_RESULT[4]
$AC_MEAS_RESULT[5]
8.4.5.5
Measurement of a tool length of two tools with the following orientation:
Tool orientation
Tools oriented towards the tool carrier must be marked by $AC_MEAS_TOOL_MASK =
0x200. The calculated tool lengths are then included negatively.
Two turning tools each with their own reference point with a tool orientation in the approach direction
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
8.4 Setting zeros, workpiece measuring and tool measuring
Description
Tool length in x
Tool length in y
Tool length in z
Tool length L1
Tool length L2
Tool length L3
Measurement (M5)
661