Travel Request - Siemens SINUMERIK 840D sl Function Manual

Revolutional feedrate
In JOG mode, the response of the axis/spindle also depends on the setting made in setting
data
SD41100 $SN_JOG_REV_IS_ACTIVE (JOG: revolutional/linear feedrate).
SD41100 $SN_JOG_REV_IS_ACTIVE (JOG: revolutional/linear feedrate)
Active
Not active
4.4.2

Travel request

Compared to the previous response, additional options are possible with the travel-request
signals, as described in the following.
"Travel-request" signals
DB21, ... DBX40.5
DB21, ... DBX40.4
DB21, ... DBX46.5
DB21, ... DBX46.4
DB21, ... DBX52.5
DB21, ... DBX52.4
DB21, ... DBX332.5
DB21, ... DBX332.4
DB21, ... DBX336.5
DB21, ... DBX336.4
DB21, ... DBX340.5
DB21, ... DBX340.4
DB31, ... DBX64.5
DB31, ... DBX64.4
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
An axis/spindle is always traversed with revolutional feedrate
MD32050 $MA_JOG_REV_VELO (revolutional feedrate for JOG)
or
MD32040 $MA_JOG_REV_VELO_RAPID
(revolutional feedrate for JOG with rapid traverse override),
depending on the master spindle.
The response of the axis/spindle depends on setting data
SD43300 $SA_ASSIGN_FEED_PER_REV_SOURCE
(revolutional feedrate for positioning axes/spindles).
The response of a geometry axis that acts on a frame with rotation
depends on channel-specific setting data
SD42600 $SC_JOG_FEED_PER_REV_SOURCE
(control of revolutional feedrate in JOG).
(In JOG mode, revolutional feedrate for geometry axes on which a frame with
rotation is effective.)
Travel request +
Travel request -
Travel request +
Travel request -
Travel request +
Travel request -
Travel request +
Travel request -
Travel request +
Travel request -
Travel request +
Travel request -
Travel request +
Travel request -
Manual and Handwheel Travel (H1)
4.4 Handwheel travel in JOG
Geometry axis 1
Geometry axis 1
Geometry axis 2
Geometry axis 2
Geometry axis 3
Geometry axis 3
Orientation axis 1
Orientation axis 1
Orientation axis 2
Orientation axis 2
Orientation axis 3
Orientation axis 3
From axis/spindle
From axis/spindle
291