Measurement (M5)
8.4 Setting zeros, workpiece measuring and tool measuring
Two milling tools each with their own reference point with a tool orientation in -y direction
In the case of the tool position of two milling tools each with their own reference point, not
only are the input variables of measurement type 23 evaluated but also the values of the
following input variables:
Approach direction +x, tool orientation -y
$AC_MEAS_TOOL_MASK = 0x80
$AC_MEAS_DIR_APPROACH = 0
664
Approach direction -x, tool orientation -y
$AC_MEAS_TOOL_MASK = 0x80
$AC_MEAS_DIR_APPROACH = 1
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions