Siemens SINUMERIK 840D sl Function Manual page 318

Manual and Handwheel Travel (H1)
4.9 Start-up: Handwheels
Example
Three handwheels are connected to a SINUMERIK 840D sl through 2 "MCP 483C IE"
machine control panels. Two handwheels can be connected to a machine control table
"MCP 483C IE".
Handwheel number
in NCK
1
2
3
Parameter setting:
Machine data
MD11350 $MN_HANDWHEEL_SEGMENT[0]
MD11351 $MN_HANDWHEEL_MODULE[0]
MD11352 $MN_HANDWHEEL_INPUT[0]
MD11350 $MN_HANDWHEEL_SEGMENT[1]
MD11351 $MN_HANDWHEEL_MODULE[1]
MD11352 $MN_HANDWHEEL_INPUT[1]
MD11350 $MN_HANDWHEEL_SEGMENT[2]
MD11351 $MN_HANDWHEEL_MODULE[2]
MD11352 $MN_HANDWHEEL_INPUT[2]
318
Machine data set
(Index)
0
1
2
Value Description
1st handwheel
7 Hardware segment: Ethernet
1 The internal Ethernet handwheel interface is taken as a
module.
3 3rd handwheel of the internal Ethernet handwheel interface.
2nd handwheel
7 Hardware segment: Ethernet
1 The internal Ethernet handwheel interface is taken as a
module.
2 2nd handwheel slot of the internal Ethernet handwheel
interface.
3rd handwheel
7 Hardware segment: Ethernet
1 The internal Ethernet handwheel interface is taken as a
module.
6 6th handwheel slot of the internal Ethernet handwheel
interface.
Connection
1st MCP; 1st handwheel in 3rd handwheel slot of the
internal Ethernet handwheel interface
1st MCP; 2nd handwheel in the 2nd handwheel slot of
the internal Ethernet handwheel interface
2nd MCP; 3rd handwheel in the 6th handwheel slot of
the internal Ethernet handwheel interface
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions