Input Offset On Source Device - ABB IRC5 Applications Manual

6 System parameters

6.4.4 Input Offset on Source Device

PROFINET Controller/Device
6.4.4 Input Offset on Source Device
Parent
Input Offset on Source Device belongs to the type Signal, in the topic I/O System.
Cfg name
TransferInputOffset
Description
The parameter Input Offset on Source Device specifies the input start bit PROFINET
internal device that will be transferred to the defined signal.
Prerequisites
The option PROFINET Controller/Device must be installed.
Limitations
The transfer is possible only to the signals of type digital output and group output.
For all cases, it is possible to transfer information from the internal device to signals
defined on other PROFINET I/O devices only.
Default value
The default value is -1. This means that Input Offset on Source Device is not defined.
Allowed values
The values are in the range of -1 to 65535.
Additional information
The parameter Input Offset On Destination Device specifies the start bit on the
internal device. The bits specified in a group are transferred starting with the first
bit.
66
© Copyright 2015-2018 ABB. All rights reserved.
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G