ABB IRC5 Applications Manual page 17

Specification overview, internal controller
Item
Number of I/O devices connected to control-
ler
Connection size
Specification overview, internal device
Item
GSDML file
PROFINET Version
Slot configuration
Connection size
Default gateway
There are multiple default gateways in the system. And hence, it is possible to
have two different default gateways in the system, one for the non-PROFINET
traffic and one that only manages the PROFINET interface and its traffic. So while
using option PROFINET Controller/Device the LAN 3 port is used only for PROFINET
traffic.
Link Layer Discovery Protocol (LLDP)
The IRC5 controller supports LLDP, but only on one port at a time. Preferrably
LLDP should be used on the PROFINET network. Any network connected to another
port must have LLDP disabled (or use equipment not supporting LLDP).
xx1800000140
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
Factory Network
Not using LLDP
Robot Controller
Service LAN 2
LAN 1
Private PROFINET network
Using LLDP
© Copyright 2015-2018 ABB. All rights reserved.
Specification
Maximum 50 I/O devices
Maximum 256 input bytes and 256 output
bytes per device.
Specification
See GSDML file on page
2.33
Slot 1-2: Digital input or output modules of
variable size
Maximum 256 input bytes and 256 output
bytes per device.
LAN 3
WAN
1 Introduction
1.2 PROFINET for IRC5
Continued
29.
Continues on next page
17