Accessories
13.6 DRIVE-CLiQ coupling
13.6.5
Installation
Figure 13-16 Hole drilling template for installation
1. Fit the DRIVE-CLiQ coupling to the mounting surface in accordance with the drilling
template.
2. Remove the protective caps on the DRIVE-CLiQ coupling.
3. Insert the DRIVE-CLiQ connector at both ends of the DRIVE-CLiQ coupling.
13.6.6
Technical data
Table 13-19 Technical data
DRIVE-CLiQ coupling 6FX2003-
0DC1x
Weight
Degree of protection
300
Unit
kg
IP67 acc. to EN 60529
0,14
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4