Cylinder Head Replacement
Cylinder Head Removal
Compression System: Service and Repairs
1. Remove the 3 (10 mm) acorn nuts securing the recoil assembly to the top of
the engine. Remove the recoil assembly.
2. Remove the fuel tank vent hose from the hose retainer on the engine shroud.
Move the carbon canister to the side of the engine.
3. Remove the shroud by lifting away from the engine.
4. Push down on the 2 air filter cover latch tabs.
Figure 116
Figure 117
Page 7–6
1P65F-2 Service Manual
3429-270 Rev A