Piston And Rings Assembly Installation - Toro 1P65F-2 Service Manual

Piston and Rings Assembly Inspection (continued)

Piston and Rings Assembly Installation

1P65F-2 Service Manual
3429-270 Rev A
Service Limit: 2.552 in. (64.845 mm)
7. Measure the inside diameter of the piston.
Sleeve Inside Diameter: 2.559 in. (65 mm)
Service Limit: 2.565 in. (65.165 mm)
8. Measure piston to cylinder clearance.
Clearance to Cylinder: 0.00059–0.00196 in. (0.015–0.05 mm).
1. Install the piston rings on the piston.
2. Install the piston into the cylinder.
3. Turn the crankshaft until the piston is at the top of the stroke.
Figure 217
Figure 218
Page 7–57 Compression System: Service and Repairs