Toro 1P65F-2 Service Manual page 225

Crankshaft Installation (continued)
1P65F-2 Service Manual
3429-270 Rev A
8. Install the sump cover to the crankcase. Secure the crankcase with 7 (10
mm) bolts. Torque the bolts to 70–105 in-lbs. (8–12 Nm).
9. Turn the motor over.
10. Install the flywheel onto the engine.
11. Install the nut securing the crankshaft to the flywheel. Torque nut to 59–66
ft-lbs. (80–90 Nm).
12. Hook the spring to the brake mechanism.
Figure 343
Figure 344
Page 9–29 Engine Lower End: Service and Repairs