Carburetor Inspection; Carburetor Assembly - Toro 1P65F-2 Service Manual

Carburetor Disassembly (continued)

Carburetor Inspection

Carburetor Assembly

1P65F-2 Service Manual
3429-270 Rev A
1. Check for debris (dirt or metal shaving) or build-up of old fuel.
2. Verify passages are open and free from debris blockage.
3. Check for dirt or old fuel residue in the carburetor. Clean the carburetor body
and parts in an ultra sonic cleaner before reassembly.
4. Check the tip of the float needle for grooves or wear.
1. Install the main jet into the carburetor body.
2. Install the needle into the float and onto to the carburetor body.
Figure 83
Figure 84
Page 6–19 Fuel System: Service and Repairs