Toro 1P65F-2 Service Manual page 41

Flywheel Removal (continued)
1P65F-2 Service Manual
3429-270 Rev A
3. Remove the shroud by lifting away from the engine.
4. Loosen the nut securing the crankshaft to the engine.
5. Unhook the spring from the brake mechanism.
6. Place a pry bar under the flywheel to pry the flywheel upwards. Use a soft
based hammer, loosen the flywheel assembly from the crankshaft, only
striking the top of the nut to prevent crankshaft damage.
Figure 12
Figure 13
Page 4–9 Engine Top End: Service and Repairs