Replacing An Air Vent Air Filter - Huawei FusionModule1000A20 Maintenance Manual

FusionModule1000A20 CT Solution
Maintenance Guide
Procedure
Step 1 Remove the faulty low-temperature component.
Step 2 Attach the new low-temperature component to the original position.
Step 3 Connect the power cable of the low-temperature component to the nearest power socket on
the pre-fab. module side panel.
----End
Follow-up Procedure
Dispose of the removed low-temperature component that is confirmed faulty.

5.2.3 Replacing an Air Vent Air Filter

Prerequisites


Impact on the System
None
Preparations
Tools: Phillips screwdriver
Materials: spare air vent air filter
Documents: none
Skill requirement: cooling engineer
Procedure
Step 1 Remove the four M4 screw assemblies securing the meshed board using a Phillips
screwdriver, and pull out the meshed board by the handle.
Issue 01 (2019-02-25)
An air vent air filter needs to be replaced.
A spare air vent air filter of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
74