Fire Extinguishing System (Ce) - Huawei FusionModule1000A20 Maintenance Manual

Ct solution
Hide thumbs Also See for FusionModule1000A20:
Table of Contents

Advertisement

FusionModule1000A20 CT Solution
Maintenance Guide
Check
Item
exhaust fan

3.6.4 Fire Extinguishing System (CE)

Table 3-17 Semi-annual maintenance checklist for the fire extinguishing system
Device
Fire
extinguishi
ng system
commission
ing
Issue 01 (2019-02-25)
Operation
hydrogen
exhaust fan.
Semi-annual maintenance of the fire extinguishing system involves system commissioning.
Before the maintenance, inform the related administrative departments of the temporary
downtime of the fire extinguishing system. In addition, remove the cable connected to the
2ND STAGE NO terminal on the extinguishant control panel to disable the linkage
control function. After the maintenance is complete, reconnect the cable to the 2ND
STAGE NO terminal on the extinguishant control panel to enable the linkage control
function, and inform the administrative departments that the system has become
operational.
Before maintaining the fire extinguishing system, remove the electrical actuator from the
container valve of the fire cylinder. This prevents the extinguishant release due to
misoperations, and prevents accidental damage.
After the maintenance, reconnect the electrical actuator, and inform the administrative
departments that the fire extinguishing system has become operational.
Operation
Commission the
fire extinguishing
system by
following the
instructions in the
Fire
Extinguishing
System
Commissioning
(CE) section in the
commissioning
guide for the
solution in use.
Copyright © Huawei Technologies Co., Ltd.
Check Standard
The hydrogen
exhaust fan is
working properly.
Check Standard
Devices work
properly, and the
management system
displays related
alarms.
3 Routine Maintenance
Troubleshooting
Check and reconnect cables to
the hydrogen exhaust fan.
If the fault persists, contact
Huawei technical support and ask
the hydrogen exhaust fan to be
replaced.
Maintenance Guide
Replace by following
instructions in 5.4.1
Replacing Fire Extinguishing
System Devices (CE).
41

Advertisement

Table of Contents
loading

Table of Contents