Labelling Measurements And Defining Resolution (Decimals) - Beko METPOINT BDL compact Installation And Operating Manual

Installation and operating manual
 Settings
Home Sensor
For other sensor configuration options, see chapters 11.2.2.5 to 11.2.2.9.
See also chapter 11.2.2.7 Labelling and configuring text fields
Note:
After confirming with OK, the field labels change to black. The values and settings are applied.
Caution:
Reference temperature and reference pressure (factory settings 20°C, 1000 hPa):
All volume flow (m³/h) and consumption (m³) values shown on the display refer to 20 °C and 1000 hPa (according to
ISO 1217). Alternatively, enter 0°C and 1013 hPa (=standard cubic metre according to DIN 1343) as the reference values. Do
not enter the operating pressure or the operating temperature as the reference values!

11.2.2.2. Labelling measurements and defining resolution (decimals)

Note:
To configure the Resolution
Tool button:
 Settings Sensor-settings A1
Home
See also chapter 11.2.2.7 Labelling and configuring text fields
48
settings A1
(decimal places), the Short name
Tool button
Confirm the changes with OK. The sensor
configuration is now completed.
and the Value name, click the
For the Value to be recorded, enter a
max. 10 characters. This name is then used in the
Charts and Chart/current values
Otherwise, the default designation (e.g. A1a) is
displayed.
A1 indicates the channel; a is the first value in the
channel, b would be the second, and
To adjust the Resolution
the arrow buttons (0 to 5 decimals places).
Tool button!
Name with
menus.
c the third.
of the decimal places, touch
METPOINT BDL compact
®
EN