Installation and operating manual
11.2.4. Backlight
Home
Settings
Set Backlight
Notice:
When the display is touched again, the brightness returns to 50%. Subsequently, the bar works like a normal slider bar.
Important:
If the Dim after box is not checked, the panel remains backlit with the currently set brightness.
11.2.5. Cleaning
Home
Settings
Cleaning
76
In this menu, you can adjust the
display (15 -100%).
Example:
Backlight
set to 50%
Check the
Dim after
box to reduce the
a minimum after the set time interval has elapsed
(here: 15 minutes).
As soon as the dimmed screen is activated again, the
Backlight
automatically returns to the last set value
(prior to dimming).
This function can be used to clean the touch screen
while measurements are running. The screen is
temporarily disabled for 60 seconds.
If 60 seconds are not sufficient for cleaning, restart
the function.
If cleaning is completed before the 60 seconds have
elapsed, press and hold the
button for one to two seconds.
EN
Backlight
of the
Backlight
to
to abort press long
METPOINT
BDL compact
®