Cable entries for external connections
Power cable terminals are located in the bypass unit. They can be accessed after
removing the metal cover (tripping loop terminals -XS1 on the cover must be opened first).
The drive is prepared for top or bottom cable entry with one or a combination of the following
cable entries:
•
Metal plate hole cable entry for power cables, ground cables and optionally for the
400 V auxiliary supply cables
•
Cable entry with EMC plates, EMC cushions and sealing grommets for auxiliary and
control cables
For detailed information e.g. location and dimensions, see
layout
design.
Manual Bypass power cable entry via holes in cable entry plate
Power cable entry can be from bottom or top.
1
Power cable entry plate (in Bypass)
2
Control cable entry (in Bypass)
3
Sealing compound
Electrical installation 33
ACS580MV Base frame & TEU