Removal Of The Float Switch; Removal Of The Air Filter - Hitachi RCI Service Manual

10 Servicing

10.4.6 Removal of the float switch

Nº
1 Float switch position
N O T E
To disconnect and remove the float switch, previously see the
chapter corresponding to the wiring diagrams in this Manual.
Remove the drain pump support screws and remove it.
Loosen the screws securing the float switch to the support.
Loosen the resin nut securing the float switch and remove it.
N O T E
The torque value of the resin nut is 0.3 - 0.4 Nm. If the torque
value is higher, the nut will be damaged.
Nº
1 Float switch

10.4.7 Removal of the air filter

Nº
1 Air filter fixture bar
Remove the air filter fixture support screws and remove the air filter.
Pull the air filter downwards.
301
SMGB0063 rev. 1 - 10/2010
Part
Part
Part
10