Removal Of The Air Outlet Grille; Removal Of The Fan Motor - Hitachi RCI Service Manual

10 Servicing

10.7.3 Removal of the air outlet grille

Remove the side panel in line with the instructions given in chapter
Removal of the side panel, see on page 316.
Remove the right shaft crank on the air louver.
Remove the four set screws from the louver and remove it.
N O T E
The louver includes the linkage brackets.

10.7.4 Removal of the fan motor

Open the air inlet grille as indicated in chapter Removal of the air filter, see on page 316.
Remove the air inlet clip.
Separate the indoor fan motor connector.
10
317
SMGB0063 rev. 1 - 10/2010