Rpk - Fsn2M Wall Mounted; Accessories Supplied With The Unit; Unit Installation - Hitachi RCI Service Manual

2 Unit installation

2.7 RPK - FSN2M Wall mounted

2.7.1 Accessories supplied with the unit

Check that the following accessories are supplied with the unit.
N O T E
Please contact your HITACHI distributor if any of the accessories has not been supplied with the unit.
Accessory
Mounting bracket
Philips head screw
Ø4.1 x 25 mm
Philips head screw
Ø4.1 x 40 mm
Insulation piping
Insulation
Cable bundle with
connector
Connector
Nut

2.7.2 Unit installation

Initial checks
Check that there is enough space around the unit. Consult the
corresponding chapter of the Technical Manual for information on
the unit measurements.
Before starting installation, plan the direction of the pipes and wiring
required. Also bear in mind that there must be enough space
around the unit for installation and maintenance.
N O T E
Bear in mind the air distribution from the unit to the room and select a suitable place for an even air temperature
in the room.
Check that the drain hose can be installed maintaining the necessary down-slope.
50
SMGB0063 rev. 1 - 10/2010
Appearance
Quantity
(1.5-2.0) (2.5-4.0)
1 1 For unit suspension.
6 8
For bracket suspension.
2 4
1 1
For the gas refrigerant pipe
connection.
1 1
1 –
Cable for the PC-ART system
2 –
1 1 For pipe installation
Purpose