Front-Facing Flash Grommet Assembly - Lenovo Moto Z4 Service And Repair Manual

Lenovo Moto Z4
Level 2 – Service and Repair Manual

Front-Facing Flash Grommet Assembly

Description
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
IP52_GASKET,FOLES
1. Use the Tweezers to remove the Front-
Facing Flash Grommet from the carrier.
2. Use the Tweezers to place the Front-
Facing Flash Grommet on the pocket in
the Front Housing as shown.
3. Use the Tweezers to remove the liner
from the Front-Facing Flash Grommet.
PAGE 112
Reference #
5
37
Lenovo Confidential Restricted:
Do not share without consent from Lenovo