Fingerprint Sensor (Fps) Removal - Lenovo Moto Z4 Service And Repair Manual

Lenovo Moto Z4
Level 2 – Service and Repair Manual

Fingerprint Sensor (FPS) Removal

NOTE
The FPS can be recovered and
reused after removal.
1. Use the Torx Driver and T3 Bit to remove
the 2 Machine Screws from the Main PCB
in the locations shown.
NOTE
After you remove the Machine Screws,
you cannot reuse them.
2. Use the Thin Plastic Spudger to open the
ZIF Connector Door of the FPS Flex.
3. Use the Tweezers to remove the FPS
Flex from the ZIF Connector Door.
PAGE 37
Lenovo Confidential Restricted:
Do not share without consent from Lenovo