Lenovo Moto Z4 Service And Repair Manual page 85

Lenovo Moto Z4
Level 2 – Service and Repair Manual
14. After the adhesive has been sufficiently
loosened, the phone will open. Use the
Thin Plastic Spudger to cut any remaining
adhesive that was attached to the ledge of
the Rear Housing.
15. Use the Blackstick to break the suction on
the suction cups attached to the Rear
Inlay. You may need to repeat this
process on some suction cups.
16. After all the suction cups have been
released, carefully slide the phone out of
the Display/Inlay Removal Fixture.
PAGE 85
Lenovo Confidential Restricted:
Do not share without consent from Lenovo