Lenovo Moto Z4 Service And Repair Manual page 84

Lenovo Moto Z4
Level 2 – Service and Repair Manual
11. Press down on the Display/Inlay Removal
Fixture handle to bring the suction cups in
contact with the Rear Inlay. Make sure all
suction cups are attached to the Rear
Inlay.
// CAUTION //
Use care when pressing down on the
Display/Inlay Removal Fixture handle. Damage
to the phone may occur.
12. T urn on the Heat Gun and set the
2 0 B
temperature to 80 °C (176 °F). Allow the
Heat Gun to warm up for 2-3 minutes.
/ / CAUTION //
1 5 5 2 B
D o not set the Heat Gun temperature higher
1 4 6 6 B
than 80 °C (176 °F). Damage to the phone may
occur.
/ / CAUTION //
1 5 5 3 B
W ear protective gloves when handling heated
1 4 6 7 B
phones.
13. Use the Heat Gun to warm the phone
edges for about 3 minutes. Keep the Heat
Gun in motion to avoid damaging the
phone.
PAGE 84
Lenovo Confidential Restricted:
Do not share without consent from Lenovo