Rear-Facing Imager Removal - Lenovo Moto Z4 Service And Repair Manual

Lenovo Moto Z4
Level 2 – Service and Repair Manual

Rear-Facing Imager Removal

NOTE
The Rear-Facing Imager can be
recovered and reused after removal.
1. Use the Thin Plastic Spudger to
disengage the Rear-Facing Imager BtB
Connector from the Main PCB.
2. Use the Thin Plastic Spudger to gently
disengage the Rear-Facing Imager from
the Main PCB in the location shown.
// CAUTION //
Use care when disengaging the Rear-Facing
Imager from the Main PCB. Damage to the
phone may occur.
3. Use the flat end of the Blackstick to
disengage the Rear-Facing Imager from
the pocket in the Main PCB.
PAGE 52
Lenovo Confidential Restricted:
Do not share without consent from Lenovo