Lenovo Moto Z4
Level 2 – Service and Repair Manual
Main PCB Assembly
Description
Stingray FRU MB NA 4+128G SS
Stingray FRU MB NA VZW 4+128G SS
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
HDW,SCR,STL,Screw_ M1.4x0.30x2.50mm_Plum
HDW,SCR,STL,Screw,M1.4X2.8,Plum
1.
Insert the Main PCB into the pocket on
the Front Housing on an angle as shown.
2.
Press down gently around the edges of
the Main PCB until it snaps into place.
NOTE
Verify that the BtB Connectors for the Battery
and the FPS, and the ZIF Connector for the
Side Keys, are not pinched or below the Main
PCB.
3.
Use the Thin Plastic Spudger to open the
Side-Key Flex ZIF Connector Door.
PAGE 132
Reference #
3
5
16
Lenovo Confidential Restricted:
Do not share without consent from Lenovo