GE LOGIQ E9 Service Manual page 193

GE H
EALTHCARE
D 5180263-100, R
IRECTION
4-3-16 Cineloop Check
For complete information, refer to the latest revision of the LOGIQ E9 Basic User Manual, Chapter 5.
4-3-16-1 To Activate CINE
1.) Press Freeze, then roll the Trackball to activate CINE.
2.) To start CINE Loop playback, press Run/Stop. To stop CINE Loop playback, press Run/Stop.
4-3-16-2 To Omit Images
1.) Roll the Trackball to the frame you want to delete and press Omit Image.
4-3-16-3 To Restore Images
1.) To undo deleting an image from the CINE Loop, press Restore Image.
4-3-16-4 To Move Quickly to Start/End Frame
1.) Press First to move to the first CINE frame.
2.) Press Last to move to the last CINE frame.
4-3-16-5 To Start Frame/End Frame
1.) Turn the Start Frame dial to the left to move to the beginning of the CINE Loop. Turn the dial
2.) Turn the End Frame dial to the right to move to the end of the CINE Loop. Turn the dial to the
4-3-16-6 To Adjust the CINE Loop Playback Speed
1.) Turn the Loop Speed dial right/left to increase/decrease the CINE Loop playback speed.
4-3-16-7 To Move through a CINE Loop Frame By Frame
1.) Turn Frame by Frame to move through CINE memory one frame at a time.
4-3-16-8 Checks
• Check Left Marker, Right Marker, Cycle Select and Number of Cycles
• Check First, Last Cycle, Select all
• Adjust Scroll and Cine Speed
5
EV
to the right to move forward through the CINE Loop.
left to move backward through the CINE Loop.
Chapter 4 Functional Checks
LOGIQ E9 Service Manual
4 - 43