Huawei FusionDC1000B Quick Manual page 10

FusionDC1000B Prefabricated Modular Data Center
Quick Guide (2021, Saudi, ITC)
3.
4.
5.
Issue 01 (2021-01-11)
Remove the connection box cover.
Figure 2-5 Removing the connection box cover
Remove the screws at the air intake and exhaust vents inside the pre-fab.
module using a Phillips screwdriver, and cut off the glue attached to the cover
using a utility knife.
Figure 2-6 Cutting off the glue
Remove the covers from the air intake and exhaust vents.
Figure 2-7 Removing the covers
Copyright © Huawei Technologies Co., Ltd.
2 Installation Guide
5