Huawei FusionDC1000B Quick Manual page 54

Component Main PDB
Category Parameter
Password
System Configuration
Configuration
attributes
Voltage
Device Configuration
Thresholds
ABB 8D ATS Initial Configuration Parameters
Default Value
0001
Rated Voltage 400/230 V
Rated Frequency 50 Hz
Number of
3 phases with N
Phases LN1
Number of
3 phases with N
Phases LN2
Secondary Load Not Used
Generator Usage No Generator
Line priority Line 1–Switch I
Volt Threshold
–20%
Min LN1
Volt Threshold
–20%
Min LN2
Volt Threshold
+20%
Max LN1
Volt Threshold
+20%
Max LN2
Value Range
/
100/57 V-115/66 V-120/70 V-208/120 V-220/127 V-
230/132 V-240/138 V-277/160 V-347/200 V-380/220
V-400/230 V-415/240 V-440/254 V-480/277 V
50 Hz, 60 Hz
3 phases with N/3 phases without N/1 phase
3 phases with N/3 phases without N/1 phase
Not Used/Opening Only/Opening And Closing
No Generator, Generator In Use
Line 1 – Switch I/Line 2 – Switch II/No Line Priority
–30% to –5%
–30% to –5%
+5% to +30%
+5% to +30%
Setting Remarks
Default Value
380 V
60 Hz
3 phases with N
3 phases with N
Default Value
Generator In Use
Line 1 – Switch
–10%
–10%
+10%
+10%