General Notes On Equipment And Product Damage - Bosch Rexroth BS 2/C Series Assembly Instructions Manual

12/76

General Notes on Equipment and Product Damage

During operation
During maintenance and
repair
During cleaning
Bosch Rexroth AG, MIT: BS 2/C-... + BS 2/R-..., 3 842 358 724/2013-04
3 General Notes on Equipment and Product
Damage
The warranty only applies to the delivered confi guration.
• The warranty will not apply if the product is incorrectly assembled, commissioned,
or operated, and/or if it is not handled or not used as intended.
• The following safety instructions apply to chapters 6 to 14.
• Ensure that there is suffi cient lubrication on the conveyor chain, see page 39.
– Maintain a maintenance schedule.
– Keep grease-dissolving or aggressive cleaning agents away from the conveyor
chain.
• Deformations such as folds and/or the chain twisting, e.g. due to the chain coil
tipping while the chain is being mounted, cause the conveyor chain to fail and can
lead to a crash.
– Ensure that the chain is lying evenly and that it runs smoothly from the chain coil
during mounting.
– Ensure that the chain coil does not tip over during assembly.
– If the chain coil has tipped over during assembly and the chain is deformed:
Use the disassembly tool to remove all of the affected area.
• Prevent cleaning agents from entering the system.
• Never use solvents or aggressive detergents.
• Do not use a high-pressure cleaner for cleaning.