Required Accessories - Bosch Rexroth BS 2/C Series Assembly Instructions Manual

7.4 Required accessories

• Leg sets to carry the belt section.
Note: Support the belt section in the direct vicinity of the drive and return unit.
The distance between two leg sets must not exceed 2000 mm.
– For BS 2/C-100, BS 2/C-250, BS 2/R-300,
BS 4/R-300, BS 2/R-700, BS 4/R-700:
SZ 2, 3 842 999 816
SZ 2/U, 3 842 999 817
SZ 2/T, 3 842 999 818
– For BS 2/C-H, BS 2/R-H, BS 2/R-V:
SZ 2-H, 3 842 998 235
SZ 2/U-H, 3 842 9998 236
SZ 2/T-H, 3 842 998 237
• To fasten the leg sets to the fl oor, each connection requires:
– 1x foundation bracket, 3 842 146 815
– 1x dowel, 3 842 526 560
– 2x T-bolts, 3 842 528 718
– 2x fl ange nuts, 3 842 345 081
• Connection kits for the transverse conveyor when using the belt section in lateral
transverse transport (drive head to section).
– BS 2/C-100, BS 2/C-250, BS 2/R-300,
BS 4/R-300, BS 2/R-700, BS 4/R-700 with:
ST 2/B, ST 2/B-100, ST 2/C-100, ST 2/R-100, 3 842 528 192
– BS 2/C-400, BS 2/C-700, BS 2/R-1200, BS 2/R-2200 with:
ST 2/B, ST 2/B-100, ST 2/C-100, ST 2/R-100, 3 842 518 828
– BS 2/C-H, BS 2/R-H, BS 2/R-V with:
ST 2/C-H, ST 2/R-H, ST 2/R-V, 3 842 530 868
• Connection kits for the longitudinal conveyor (drive head to return unit)
– BS 2/C-100, BS 2/C-250, BS 2/R-300,
BS 4/R-300, BS 2/R-700, BS 4/R-700 with:
BS 2/C-100, BS 2/C-250, BS 2/R-300,
BS 4/R-300, BS 2/R-700, BS 4/R-700, 3 842 529 881
– BS 2/C-400, BS 2/C-700, BS 2/R-1200, BS 2/R-2200
BS 2/C-H, BS 2/R-H, BS 2/R-V with:
BS 2/C-100, BS 2/C-250, BS 2/R-300,
BS 4/R-300, BS 2/R-700, BS 4/R-700
BS 2/C-400, BS 2/C-700, BS 2/R-1200, BS 2/R-2200
BS 2/C-H, BS 2/R-H, BS 2/R-V, 3 842 530 871
3 842 358 724/2013-04, MIT: BS 2/C-... + BS 2/R-..., Bosch Rexroth AG
Assembly 17/76