Bs 2/C-H, Bs 2/R-H, Bs 2/R-V-1200, Motor Mounting (Ma) = M - Bosch Rexroth BS 2/C Series Assembly Instructions Manual

Note:
The gear motor can only
be exchanged completely.
Separating the motor from
the gear is not permitted!
1. Disassemble the side
cover plates.
2. Remove the retainer
rings from the hexagonal
shaft.
3. Push the hexagonal shaft
out of the drive.
Keep the sheath tube
for reusing.
4. Disassemble the fl ange
from the gear motor.
5. Assemble the fl ange
on the new gear motor.
6. Assemble the gear motor
and tighten the screws
by hand.
7. Push the hexagonal shaft
into the drive.
Attach the sheath tube.
Secure the hexagonal
shaft with retainer rings.
8. Once the gear motor
is centered through the
hexagonal shaft, tighten
the screws fi rmly.
10.4.24 Exchanging the gear motor:

BS 2/C-H, BS 2/R-H, BS 2/R-V-1200, motor mounting (MA) = M

2
4x
6
SW4
M = 7 Nm
D
7
Fig. 54: Exchanging the gear motor, motor mounting (MA) = M
Maintenance and Repair
3 842 358 724/2013-04, MIT: BS 2/C-... + BS 2/R-..., Bosch Rexroth AG
71/76
4 5 6 8
SW10
M = 8 Nm
D
1
2
3
8
4x
SW4
M = 7 Nm
D
547 601-66