Mitsubishi Electric Y Series Manual page 207

AHC adapter
PAC-IF01AHC-J
Dimensions: 116(W) x 90(H) x 40(D) mm
: 4-9/16(W) x 3-1/2(H) x 1-9/16(D) in.
AHC allows Mitsubishi Electric's air-conditioning network system (M-NET) to be connected to other systems, which was
not possible with the use of ALPHA2 alone. AHC provides the following functions:
1 Controls external devices using the sensor data of air-conditioning units connected to M-NET.
2 Interlocks the operation of air-conditioning units and external devices that are connected to ALPHA2.
3 Controls air-conditioning units that are connected to M-NET.
4 Allows for the combined use of items 1 - 3 above.
5 Monitors the input/output status of ALPHA2 via a remote controller or centralized controller.
Compatible controllers
• Remote controller: PAR-U02MEDA
• Centralized controller: AE-200E, AE-50E, EW-50E
* Refer to the ALPHA2 manual for detailed information about ALPHA2.
* Use of the AHC adapter requires either a remote controller or centralized controller.
• System structure
M-NET
Centralized controller
AE-200E
The Advanced HVAC Controller (AHC) comprises Mitsubishi
Electric's AHC adapter (PAC-IF01AHC-J) and α2 simple
application controller* (ALPHA2).
*The α2 simple application controller is a programming logic
Outdoor unit (Y) Outdoor unit (Y)
M-NET
M-NET
Outdoor unit (R2) Outdoor unit (R2)
BC controller
CENTRALISED REMOTE CONTROLLER
controller manufactured by Mitsubishi Electric Corporation.
Group 1
AHC
ALPHA2
AHC Adapter
PAR-U02MEDA
Group 3
PAR-U02MEDA
Group 2
PAR-U02MEDA
207