Clean the area where the new
4.
Paper Discharger is to be
installed with a cotton cloth.
Install the new Paper Discharger
5.
into the Transfer Unit in the
reverse order that you removed
it.
Plug the printer into the AC outlet.
6.
Press the Power button to turn on the printer.
7.
Press any of the Menu button (+, – , Set or Back) to take the printer Off
8.
Line.
Press + or – until "RESET MENU" appears.
9.
Press Set to proceed to the next menu level, and then press + or – until
10.
"PARTS LIFE" appears.
Press Set, and then press + until "120K KIT" appears.
11.
Press Set, and then press Go. The printer is now in the READY state.
12.
5-31
CHAPTER 5 MAINTENANCE
Fig. 5-30
Fig. 5-31