Brother HL-2600CN Series User Manual page 21

CHAPTER 1 INTRODUCTION
Note
Depending on the country where you purchased the printer, you may have
additional parts that are not listed above.
!
Caution
The Toner Cartridges, OPC Belt cartridge, Oil Bottle and Fuser Cleaner are
packed inside a separate carton as a starter kit. Do NOT open them now.
Only open them when you are ready to install them. The OPC Belt Cartridge
must not be exposed to light for any length of time or it will be damaged.
Note
An interface cable is not a standard accessory. Please purchase the
appropriate cable for the interface you intend to use. Parallel cables should
be IEEE 1284 compliant and should not exceed 1.8 meters (6 feet) in length.
Depending on the country where you purchased the printer, the power cord
may differ slightly from this diagram.
Note
Depending on the country you live in and the HL-2600CN series model
purchased, you may have additional parts not listed above.
Note
We recommend keeping spares of the following consumables at all times.
When these are exhausted, the printer will cease printing.
•
Toner Cartridges (TN-03BK, TN-03C, TN-03M, TN-03Y)
•
Waste Toner Pack (WT-3CL)
•
Oil Bottle (FO-2CL)
•
Fuser Cleaner (CR-3CL)
•
OPC Belt Cartridge (OP-3CL)
1-4