Manual Feed - Brother HL-2600CN Series User Manual

M F
M F
M F
A N U A L E
A N U A L E
A N U A L E
Since this printer does not have a manual feed or multi purpose tray, you
cannot manually feed irregular sized paper. However, this printer has a
special "Manual Feed" mode using Tray 1 (upper tray) to accommodate
non-standard paper sizes. You can select this mode with the printer driver
or the control panel.
See "PAPER" in Chapter 4
using the printer Control Panel.
1.
When the manual feed command is selected, the printer waits until you
load the paper in Tray 1.
2.
Pull out Tray 1 and load the paper you are going to use. It may be
necessary to remove some or all of the paper stack first, depending on
the size of paper in the tray and the size of the paper you wish to print
on manually.
3.
Re-install Tray 1 and press Go. The printer will then start printing.
Note
•
Print quality may be affected by the type of paper you use and the print
image.
•
You may experience poor paper feeding during Duplex printing.
•
This machine is not designed for continuous Duplex printing.
•
During manual duplex printing, if you leave the printer for more than 5
minutes after the first side has been printed, the printer will reset the
function automatically.
E D
E D
E D

MANUAL FEED

=ON
CHAPTER 3 BEFORE WORKING WITH THE PRINTER
for more information on selecting this setting
3-13