Ram Expansion - Brother HL-2600CN Series User Manual

R A M E
R A M E
R A M E
X P A N
X P A N
X P A N
This printer has 64 Mbytes of standard memory and 3 slots for optional
expansion memory. The memory can be expanded by 384 Mbytes by
installing commercially available dual in-line memory modules (DIMMs).
(The standard memory fitted can vary depending on the printer model and
the country.)
This printer uses memory modules that are:-
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM, or
DIMM that uses 16Mbit SDRAM.
The following capacity of DIMM can be installed:
<Europe>
•
16 Mbyte
•
32 Mbyte
•
64 Mbyte
•
128 Mbyte BUFFALO TECHNOLOGY 12326-0001
<US>
•
16 Mbyte
•
32 Mbyte
•
64 Mbyte
•
128 Mbyte TECHWORKS 12459-0001
In general, the DIMM must have the following specifications:
Type:
CAS Latency:
Clock Frequency:
Capacity:
Height:
Parity:
Dram Type:
S I O N
S I O N
S I O N
BUFFALO TECHNOLOGY 12323-0001
BUFFALO TECHNOLOGY 12324-0001
BUFFALO TECHNOLOGY 12325-0001
TECHWORKS 12456-0001
TECHWORKS 12457-0001
TECHWORKS 12458-0001
100 pin and 32 bit output
2
66Mhz or more
16,32,64 or 128 Mbyte
46mm (1.8 inches) or less
NONE
64 M bit SDRAM 4 Bank SDRAM can be used.
5-63
CHAPTER 5 MAINTENANCE