Brother HL-2600CN Series User Manual page 152

CHAPTER 5 MAINTENANCE
!
Caution
•
Do not touch the OPC Belt surface with bare hands or gloves.
•
If the Belt is exposed for more than two minutes to a light source of 800
lux, the Belt may be damaged.
Clean the OPC Belt Cartridge and the OPC Belt Cartridge Case with a
12.
dry cotton cloth.
Clean the Corona Wire. Remove any toner on the Corona Wire with the
13.
Corona Wire Cleaner supplied with the Corona Case by sliding the
Corona Wire Cleaner gently from left to right.
!
Caution
•
Do not break the Corona Wire.
•
Place the Corona Wire Cleaner back to the original position after
cleaning the Corona Wire.
Fig. 5-46
Fig. 5-47
5-40