Brother HL-2600CN Series User Manual page 180

CHAPTER 6 TROUBLE SHOOTING
Error Message
CHANGE FCR
Replace the cleaning roller.
NO OPC BELT
Install the OPC belt.
NO FC ROLLER
Install the cleaning roller.
NO LFU
Install the lower tray unit.
NO TR ROLLER
Install the transfer roller.
ILLEGAL TONER
Use only Brother genuine toner cartridge.
NO TRAY 1/2
The indicated paper tray was not detected. Install it, or
ensure that it is inserted correctly.
SIZE ERROR T1/2
Specify the correct paper size for the indicated tray.
SIZE ERROR DX
The duplex unit can print only in the sizes specified. Specify
the correct paper size.
STACKER FULL
Remove the paper from the output tray.
MEDIA MISMATCH
Media mismatch between the Printer and the Printer Driver
setting. Load XX into Tray <1/2>.
SIZE MISMATCH
Paper mismatch between the Printer and the Printer Driver
setting. Load Paper <size> size into Tray <1/2>
MANUAL FEED
Load paper <size> into Tray1, and then press GO.
MEDIATYPE ERROR
Specify the correct media type: XX
XX=T1, T2, or DX
NO FUSING UNIT
A fusing unit was not detected. Please install one.
CARD ERROR
An error occurred when accessing the Flash card. Check
that the driver is formatted and not in Write Protect mode.
6-2
Remarks
When the Duplex Unit is
installed.
XX = Plain Paper,
Transparencies, Thick
Paper
XX = T1, T2 or DX