WEB USER INTERFACE (WEBUI)
_______________________________________________________________________________________________________________
PTC Class D Tests
•
PTC Class D Tests verify the IP based point to point protocol for messaging. Test message can be enabled and
sent to a test server. The test results are logged for review later.
Set All
Refresh
Save
Discard
Parameters
Screen
Changes
Changes
To Default
Figure 4-117 PTC Class D Tests
4.1.6
Diagnostics
The Diagnostic menu has three sub-menus, Information, GEO Statistics, and CDL Status as shown in Figure
4-118 below.
Figure 4-118 Diagnostics
4-72
SIG-00-13-12
February 2021
Version No.: B