Figure 1-3 Ecd Flashing Red To Indicate It Is Actively Writing Data; Table 1-1 Indicator Information - Siemens A80672 Installation & Operation Manual

INTRODUCTION
_______________________________________________________________________________________________________________

Figure 1-3 ECD Flashing Red to indicate it is actively writing data

Indicator LED Color
Power Green
Health Green
On-Site Yellow
ITC Comms Green
Beaconing Green
Time Sync Green
SIG-00-13-12
Version No.: B

Table 1-1 Indicator Information

LED State
On Power is applied to the unit
Power is not applied to the unit or the internal power supply
Off
has failed
Flashing
System is healthy
Slowly
Flashing
System is not healthy
Rapidly
On Pending request for local user presence
Flashing Local user presence verification accepted and active
No pending requests, no actions that require on-site
Off
personnel can be performed
On Class D connection established with application gateway
Flashing Unit is attempting to connect with application gateway
Off No Connection No attempt to connect
On Unit currently transmitting WSMs with the "Beacon Bit" set
Unit sending WSMs beacon end timer is running (beacon bit
Flashing
not set)
Unit is not beaconing (neither beacon timer nor beacon end
Off
timer are running)
On Unit is synchronized via Class C time updates or SNTP
Flashing Unit is not receiving updates and 8-hour timeout running
Off Not synchronized, 8-hour timeout has occurred
1-4
Description and Function
February 2021