Table of Contents
Advertisement
_______________________________________________________________________________________________________________
SNMP Traps
•
SNMP messages sent from the PTC Console are received in the Back Office. The CDL program defines which
alarms are sent.
SNMP OID
deviceType.0
dateTime.0
siteName.0
milePost.0
spareText2.0
spareText1.0
alarmPriority.0
alarmClearFlag.0
alarmText.0
alarmID.0
trapNum.0
snmpTrapOID.0
sysUpTime.0
SIG-00-13-12
Version No.: B
Table 4-1 SNMP Information
VALUE
iVIU
03-May-2012 18:56:13
CP_Safetran_312
35.2
2950240fd20218
4
0
Alarm Enabled Message
2
3
1.3.6.1.4.1.3064.3.20.2.2
1days22h55m24.59s
DESCRIPTION
Defines the type of equipment that sent the
SNMP trap. For the PTC Console, this field
will always contain "iVIU"
Date and Time the system created the alert
This field contains the Site Name, as set in
the PTC Console configuration settings.
This field contains the Milepost Number, as
set in the PTC Console configuration
settings
Not used. Reserved for future use.
Not used. Reserved for future use.
The priority of the alarm as set by the iVIU's
CDL logic. This value is specific to each
alert (see the manual for the specific CDL
program).
Indicates whether this is the alarm or the
corresponding clear for the alarm.
The Alarm text as programmed into CDL
logic. This value is specific to each alert
(see the manual for the specific CDL
program).
The Alarm ID number as programmed in the
CDL logic. This value is specific to each
alert (see the manual for the specific CDL
program).
The Trap Number as programmed in the
CDL logic. This value is specific to each
alert (see the manual for the specific CDL
program).
The ID of the trap in the unit's MIB. This
value is specific to each alert (see the
manual for the specific CDL program).
System Up Time
4-23
WEB USER INTERFACE (WEBUI)
February 2021
Advertisement
Table of Contents
