Table of Contents
Advertisement
INSTALLATION AND CONFIGURATION
_______________________________________________________________________________________________________________
3.2
CONSOLE INSTALLATION
The PTC Console is mounted to the relay rack assembly using the optional mounting bracket. The PTC Console
has four #8 threaded mounting holes on the rear of the unit.
3.2.1
Installing Mounting Bracket to Console
Use the following procedure to install the optional Mounting Bracket to the PTC Console:
1. Position the mounting bracket with the counter sunk holes facing away from the console.
2. Mount the bracket to the PTC Console using four #8 flat head screws as shown in Figure 3-6.
SIG-00-13-12
Version No.: B
Figure 3-6 Installing PTC Console Mounting Bracket
3-6
February 2021
Advertisement
Table of Contents
