Siemens A80672 Installation & Operation Manual page 123

_______________________________________________________________________________________________________________
A.5 WHO
who [m|r|s]
Display the WIU model, revision, and serial number.
who [m <model>]
Used by manufacturing to set the model number.
who [r <revision>]
Used by manufacturing to set the revision level of the WIU.
who [s <serialnum>]
Used by manufacturing to set the serial number.
A.5.1. Description
The who command displays the model, hardware revision, and serial number of the WIU product. This
command also shows the site name, DOT number (unused), milepost, and ATCS address for the product.
Siemens Mobility, Inc. manufacturing use the who command to set the model, revision, and serial number data.
[FUTURE, not yet implemented] This command will also show the software and hardware revision information
for the connected GEO systems. For each GEO and for each card in the GEO chassis, the following will be
shown:
Software version
•
• Software ID
Software CRC
•
Latest Hardware Revision
•
• Hardware Revision Shipped
Part number
•
• Serial number
Build date
•
Warranty date
•
Use the who command with no arguments to view the information.
The following are the command line options, which are used by Siemens Mobility, Inc. manufacturing.
m, M <model>
Used by Siemens Mobility, Inc. manufacturing to set the WIU's model number.
r, R <revision>
Used by Siemens Mobility, Inc. manufacturing to set the WIU's revision level.
s, S <serialnum>
Used by Siemens Mobility, Inc. manufacturing to set the WIU's revision level.
SIG-00-13-12
Version No.: B
A-5
SYSTEM MANAGEMENT
February 2021