Figure 4-29 Web Server Configuration; Figure 4-30 Modules - Connections - Siemens A80672 Installation & Operation Manual

_______________________________________________________________________________________________________________
Web Server Configuration
•
Click on the Web Server text (located below the Security menu) to open the Web Server screen. The Web
Server parameter sets the WebUI access security to the PTC Console. Select Secure or Non-Secure (Secure is
recommended) and click Save to save the selection.
4.1.2.5 Modules
The Modules Menu has one sub-menu: Connections as shown in Figure 4-30.
Modules - Connections
•
At this time the only module supported is the GEO. Additional modules will be included in future releases. The
Connections screen displays the installed modules. To install a new module, click on the desire module slot in
the MODULES column. A parameters screen will appear listing the required parameters for the module to be
installed. It will be necessary to have the proper UCN number available to complete the installation. Drop-down
menus are used on the module Type and Connection Type.
When a PTC GEO site has been selected, the OCE will automatically create connections for each GEO
expected in the installation.
SIG-00-13-12
Version No.: B

Figure 4-29 Web Server Configuration

The user must enter the UCN for the GEO that is to be PTC enabled A UCN
for each GEO connection is required. If this is not entered correctly, the PTC
Console will not be able to PTC Enable that GEO.

Figure 4-30 Modules - Connections

NOTE
4-19
WEB USER INTERFACE (WEBUI)
February 2021