Epson Stylus PHOTO RX640 Service Manual page 24

EPSON Stylus PHOTO RX640/650
Causes
While XHTML-Print data could be decoded, a part
A part of the reference object
or all of reference object decoding was abandoned
cannot be buffered (BT-
due to memory shortage or excess of the max.
MIME).
number of objects to be handled.
An error has occurred in communication with the
BT communications error
BT adapter.
External device installment An unsupported device has been installed.
Menu change or printing Entering a menu screen for use of memory cards or
operation with a DSC starting to print was attempted with a DSC
connected connected.
Reprint/Restore Photos Cannot recognize the Photos
Film print Cannot recognize the Film
Combo print error 1 (Euro)
No recognition mark could be found on the
Photo Greeting card error 1
template sheet.
(EAI)
No mark is given in the Paper Type or Text Style
Combo print error 2 (Euro)
selection area, or more than one mark is given.
Photo Greeting card error 3 No mark is given for compose layout, or more than
(EAI) one mark is given.
Photo Greeting card error 4 No mark is given for compose paper type, or more
(EAI) than one mark is given.
Troubleshooting
Table 3-2. Warning List (continued)
Details
Error in the data.
The document may not be printed correctly.
Bluetooth print adapter cannot be recognized.
Please remove and reinstall the adapter.
Cannot recognize the USB device.
Camera is connected.
Disconnect the camera and try again.
No photos could be recognized. Make sure the photos are positioned
correctly. For details, see your manual.
A slide or negative could not be recognized.
Make sure the film holder is properly positioned and the film is inserted
in the holder.
For details, see your manual.
There was an error reading the template.
Check that the template is correctly located on the glass and try again.
Selection of the text style is not correct.
Please select only one text style and try again.
The layout has not been selected or the ovals are not marked correctly.
Only one layout may be selected.
Please correct and try again.
The paper type has not been selected or the ovals are not marked
correctly.
Only one paper type may be selected.
Please correct and try again.
Troubleshooting When There is Error Display
Displayed Message (TBD)
Guide Display "<OK>: Cancel"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Cancel"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Revision A
Recovery Procedure
Press the OK button or wait for a
certain time (approx. 5 seconds).
Remove the BT adapter.
Press the OK button to delete the
message.
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
24