Stacker Assy - Epson Stylus PHOTO RX640 Service Manual

EPSON Stylus PHOTO RX640/650

4.3.3 Stacker Assy

1. Remove the Printer Mechanism (p.53)
2. Push the CD-R Guide Lever to raise the CD-R Guide.
3. Release the hook, and remove the CD-R Guide Lever. (Fig. 4-34)
4. Lower the CD-R Guide, slide the shaft side of the CD-R Guide Lever Spring,
release its hook side end, and remove the spring. (Fig. 4-35)
5. Remove the screws (x4) securing the Stacker Assy. (Fig. 4-36)
6. Holding the right and left Stacker Guide areas, remove the Stacker Assy from the
Housing Lower.
7. Release the hook, and remove the gear from the CD-R Shaft. (Both right and left)
8. Remove the CD-R Shaft from the Stacker.
(éüÇÃÉyÅ[ÉWÇ÷ë±Ç¦)
CD-R Guide Lever
Figure 4-34. Removing the CD-R Guide Lever
CD-R Guide Lever Spring
Figure 4-35. Removing the CD-R Guide Lever Spring
Disassembly and Assembly
Lower the lever
Hook
Disassembly of Housing Lower Assy
3
1
C.B.P-TITE 3x8 (x4)
·
Torque : 0.6±0.1N
Left Stacker
Guide
Figure 4-36. Removing the Stacker Assy
Gear
CD-R Shaft
Figure 4-37. Removing the Gear and the CD-R Shaft
Revision A
Stacker
4
m
Right Stacker
Hook
2
Guide
55